Bavarian Brewing Technologies 10 Hectoliter Brewing System

bavarian611SALE PENDING… thanks for checking!

This is a used Bavarian Brewing technologies 10 hectoliter brewing system with copper clad brewing system including traditional copper domes on two vessels, 5 fermenters and 3 bright beer tanks. The system has been in operation until April 2015 and is available end of April. It is located overseas and the budget price shown includes delivery to West Coast USA ports. Door delivery to destination is possible.

Brewhouse Package:
The brew house system is assembled on 2 stainless steel frames with legs and consists of :

1 - Hot liquor tank, located below the Mash/ Lauter tun. Including:
- Made of stainless steel
-  Manhole integrated
- Insulated & clad in copper
- Level sight glass
- Analog thermometer
- PT 100 thermocouple well/probe
- steam heating jacket
- connection to brew house piping
- 4 stainless legs, height adjustable

1 - Mash/ Lauter system (located above the Hot water tank)
- Made of stainless steel
- Manhole integrated on top
- Spent grain door integrated in cylinder part
- Insulated & clad in copper
- Agitator / raking device, connected to motor/ gear box (situated on top of the vessel)
- CIP/ sparge line
- False bottom, made of stainless steel with milled slits
- All connections to brew house piping
- Analog thermometer
- Pre- masher (currently not used)
- Steam heating jacket (currently not used because the mash in the kettle)

1 - Mash/Wort kettle
- Made of stainless steel
- Sliding Mandoor integrated on top
- Insulated & clad
- Copper cladding for Cylinder & dome + vent pipe in copper
- Ajitator , connected to motor/ gear box (situated under the vessel)
- CIP/ sparging line
- All connections to brew house piping
- PT 100 thermocouple well/probe
- Pre- masher (currently not used)
- Steam heating jacket
- 4 stainless legs, height adjustable

1 - Whirlpool
- Made of stainless steel
- Sliding Mandoor integrated on top
- Insulated & clad
- Copper cladding for Cylinder & dome + vent pipe in copper
- Tangential wort inlet (also used as upper outlet)
- (1) x Wort outlet in bottom
- CIP/ sparging line
- All connections to brew house piping
- 4 stainless legs, height adjustable
- overflow pipe

1 - Brew house piping
- Made of stainless steel with butterfly valves & sight glasses integrated
- Situated between Lauter/ Hot water tank and kettle
- welded & triclamp connection
- Transfer to and from Whirlpool carried out via hoses

1 - Spent grain slide, made of stainless steel

1 - Platform, between Lauter/ Hot water tank and Kettle
- Made of stainless steel
- With stairs, made of stainless steel (currently not attached on the pictures)
- To access Mash /Lauter and Kettle

1 - Platform, between Kettle and Whirlpool
- Made of stainless steel
- With stairs, made of stainless steel
- To access Whirlpool

1 - Mash/ wort pump
- Sanitary stainless centrifugal pump
- Made by Hilge/ Germany
- Integrated in brew house piping

1 - Water filter (to supply Brew house), made of stainless steel

1 - Wort Plate heat exchanger, single stage, made by Alfa Laval

1 - Control Panel for Brew house & tanks

Cellar Equipment:
5 -  Fermentation tanks with cone
- Made of stainless steel
- Insulated & cladded (cone & cylinder)
- Manhole on top
- Total content approx. 1260 ltr.
- CIP Line
- PRV valve
- Operation pressure 15 psi
- (1) x outlet in conus
- (1) x bottom outlet/ inlet
- sampling valve
- level sight glass
- analog thermometer
- 2 cooling jackets
- PT 100 thermocouple well/probe
- pressure gauge
- 3 butterfly valves
- Dimensions: Diameter approx. 1200 mm , Height approx.. 2700 mm

Bright Beer Tanks:
3 - BBT`s with dished bottom
- Made of stainless steel
- Insulated & cladded (cone & cylinder)
- Manhole on top
- Total content approx. 1220 ltr.
- CIP Line
- PRV valve
- Operation pressure 15 psi
- 1 x outlet above dished bottom
- 1 x bottom outlet/ inlet
- sampling valve
- level sight glass
- analog thermometer
- Cooling jacket
- PT 100 thermocouple well/probe
- pressure gauge
- 3 butterfly valves
- Dimensions: Diameter approx. 1200 mm , Height approx.. 2350 mm

Miscellaneous items:
28 - 50 liter Stainless kegs @ 50 USD/ keg. (euro well type fitting)

PRICE FOB WEST COAST USA PORT $159,000 (container yard--local delivery extra)

For more pictures, questions, and inquiries click here

bavarian131   bavarian021   bavarian311